Gas cooker and hob fitting by SW Plumbing & Heating
Safe fitting, connection and removal of gas cookers, hobs and range cookers across Skipton, the Yorkshire Dales, Craven and East Lancashire, from a Gas Safe registered engineer.

Gas cooker and hob fitting near you
A new gas cooker or hob is something you use every day, so it needs to be connected properly and checked before you cook on it. We fit freestanding gas cookers, built-in gas hobs, range cookers and gas ovens for homes across Skipton, the Yorkshire Dales, Craven and East Lancashire.
We can disconnect and cap off your old appliance, connect the new one, test everything and show you that it’s working safely. We’ll agree the price with you before any work starts, and explain anything you’d like to know in plain English.
Why it must be a Gas Safe engineer
The law says anyone who works on a gas appliance in your home must be on the Gas Safe Register. That includes connecting, disconnecting and moving a gas cooker or hob, even if it’s a like-for-like swap. Simone is Gas Safe registered, number 676264.
A badly connected cooker can leak gas, or burn poorly and produce carbon monoxide, which you can’t see or smell. You can check any engineer on the Gas Safe Register website, and every registered engineer carries an ID card showing the types of gas work they’re qualified to do.
If you rent your home, your landlord is responsible for the gas appliances they provide and must have them safety checked every year.
What we fit
Freestanding gas cookers
Most freestanding cookers connect to a bayonet point on the wall with a flexible hose. The cooker should be fitted with its stability bracket or chain, so it can’t tip forward if someone leans on an open oven door.
Built-in gas hobs
Hobs set into a worktop are usually connected with a rigid or semi-rigid pipe underneath. We check the cut-out and the space around it match the manufacturer’s instructions.
Range and dual fuel cookers
Range cookers are heavier and often need a larger gas supply. Dual fuel models have a gas hob and an electric oven, so they also need a suitable electrical supply.
Disconnecting and capping
If you’re switching to electric or taking a cooker out, the gas supply has to be disconnected and capped safely. We can do this on its own or as part of a new fitting.
Before you buy
A little planning can save problems on fitting day. It’s worth checking these things before you order:
- Measure the space, including the height and depth, and compare it with the appliance specification
- Check whether your home uses mains gas or LPG. Many appliances need converting for LPG, and some can’t be converted
- Look at where your gas point is. If the new cooker or hob is going somewhere different, the pipework may need extending
- For dual fuel or range cookers, check you have a suitable electrical connection nearby
- Read the installation section of the manual for the clearances needed above and beside the hob
If you’re not sure about any of this, send us the make and model when you book and we’ll talk it through with you.
Safety around your cooker
Gas cookers are safe when they’re fitted and looked after properly. These signs mean something isn’t right and the appliance should be checked:
- Flames that are yellow, orange or floppy rather than crisp and blue
- Black or brown sooty marks around the burners or the oven door
- Burners that are hard to light or go out on their own
- A smell of gas when the cooker is off or while it’s lighting
A carbon monoxide alarm in any room with a gas appliance is a good idea. If you smell gas, open the windows, don’t use light switches or anything that could spark, turn off the gas at the meter and call the National Gas Emergency Service on 0800 111 999.
What happens on the visit
We’ll turn off the gas supply, disconnect your old appliance and cap the pipe. Then we connect the new cooker or hob using the right fittings for that appliance, and fit the stability bracket where one is needed.
Once it’s connected, we test the gas pipework for leaks, check the gas pressure and light every burner to make sure each one burns correctly. We check the grill and oven too, and show you how everything works. Before we leave, we tidy up after ourselves.
If we find a problem with the existing gas supply, we’ll explain what it is and what’s needed, and agree any extra work with you before going ahead.
Questions people ask
How much does it cost?
It depends on the type of appliance, whether the gas point is in the right place and whether any pipework needs changing. We’ll agree the price with you before we start, so there are no surprises.
How long does it take?
A straight swap of a freestanding cooker is usually fairly quick. Built-in hobs, range cookers and jobs needing new pipework take longer. We’ll give you an idea when we confirm your booking.
Can you take my old cooker away?
Let us know when you book. Many retailers collect the old appliance when they deliver the new one, so it’s worth asking them too.
Can I fit it myself if it just plugs in?
No. Even with a bayonet connection, fitting a gas appliance is gas work and must be done by a Gas Safe registered engineer. Manufacturers usually need it for the warranty to be valid as well.
“Simone installed my new gas cooker and uninstalled my old one. She turned up on time, was very thorough in her work and very friendly. I will call her again if and when I need a plumber and I would not hesitate to recommend her to anyone.”
“Simone came out to sort my oven. She was extremely friendly, reliable and made me at ease that she was confident on what she was doing. She also explained the issue so I could understand. She was very reasonable in her pricing. I will be using her again when needed. Great job.”
“Simone fitted me in at the last minute to do a gas safety check. She was punctual, polite and very efficient, whilst being friendly and approachable. Prices are excellent. Service was excellent. I will most definitely be using her again and would absolutely recommend her to anyone. 5 stars all day long.”
Why customers choose us to fit their gas cooker.
We turn up on time
You'll get a message on the morning, and another if we're running late.
We answer questions
We tell you what's wrong and what we're doing, in words that make sense.
We do things right
Careful work, neat pipework, and your home left as tidy as we found it.
We price fairly
You'll know the price before any work starts.
We're fully qualified
Gas Safe registered (No. 676264) for gas and LPG, so your boiler and appliances are fitted and checked to the rules.
We're local & reputable
Based in Skipton and working across the Dales, Craven and East Lancashire, with 5-star reviews from customers near you.
We're Gas Safe Registered
Gas Safe No: 676264
Get your new cooker connected safely.
Tell us what you’re having fitted and pick a day that suits you. We’ll get in touch to confirm a time.
“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
We're Gas Safe registered: No: 676264




