Heating controls and thermostats by SW Plumbing & Heating

Thermostats, timers, smart controls and radiator valves fitted and fixed across Skipton, the Yorkshire Dales, Craven and East Lancashire.

Heating controls near you

Good heating controls keep your home warm when you need it and stop you paying to heat it when you don’t. We fit, upgrade and repair thermostats, timers, smart controls and radiator valves for homes across Skipton, the Yorkshire Dales, Craven and East Lancashire.

We’ll look at what you have, ask how you use your home and explain the options in plain English. The price is agreed with you before any work starts.

The controls most homes need

Timer or programmer

Sets when the heating and hot water come on and go off. A programmer that lets you set different times on different days is useful if your week isn’t the same every day.

Room thermostat

Measures the air temperature and switches the heating off once the room is warm enough. It should be in a room you use often, away from radiators, draughts and direct sunlight.

Thermostatic radiator valves (TRVs)

These sit on each radiator and let you set different temperatures in different rooms, so a spare bedroom doesn’t need to be as warm as the living room.

Cylinder thermostat

If you have a hot water cylinder, this stops the boiler heating the water more than it needs to.

The Energy Saving Trust advises that a programmer, room thermostat and TRVs together are the basic set of controls every home with a boiler should have.

Smart thermostats and other upgrades

Smart thermostats let you control your heating from your phone, change settings when your plans change and see how much you’re using. Some learn how long your home takes to warm up and start the heating at the right time.

Other options include:

  • Smart radiator valves, which let you set times and temperatures for each room
  • Weather compensation, which uses an outside sensor to run the boiler at a lower temperature on milder days
  • Load compensation, which adjusts the boiler’s output depending on how close the home is to the set temperature
  • Zoning, which splits a larger home into areas with separate timers and thermostats

Not every control works with every boiler, so we check compatibility before recommending anything.

Signs your controls need attention

  • The heating comes on at the wrong times, or not at all
  • Rooms are too hot or too cold, whatever the thermostat says
  • The boiler keeps running even when the house is warm
  • A wireless thermostat has lost its connection to the boiler
  • A blank or flickering display on the thermostat or programmer
  • Radiators that won’t warm up, or won’t turn down, at the valve
  • Hot water that’s too hot, or not hot enough, from a cylinder

Things you can check yourself

  • Check the batteries in a wireless thermostat or smart valves
  • Check the date and time on the programmer, especially after a power cut or the clocks changing
  • Make sure the thermostat isn’t near a radiator, lamp, sunny window or draughty door
  • If a TRV has been left on a low setting all summer, its pin can stick. Turning it fully up and down a few times sometimes frees it
  • For smart controls, check your home Wi-Fi is working and the app is up to date

Don’t open the boiler or any wiring centre to look at the controls. Those connections are best left to a qualified engineer.

Getting the most from your controls

  • Set the room thermostat to the lowest temperature you’re comfortable with. The Energy Saving Trust suggests between 18°C and 21°C for most people
  • Turning the thermostat up higher doesn’t heat the house faster. It just keeps the boiler running for longer
  • Set the timer so the heating comes on a little before you need it and goes off a little before you go out or go to bed
  • Use TRVs to keep rooms you use less at a lower setting, rather than turning radiators off completely
  • Don’t fit a TRV on the radiator in the same room as the room thermostat, as the two will work against each other

Anyone in the home who is older, unwell or very young may need it warmer, so set the controls to suit your household.

When new controls are needed

Fitting new controls is often a quick job on its own. They’re also part of any new boiler installation. In England, a new boiler needs a timer and room thermostat, and room temperature controls such as TRVs should be fitted where it’s practical. New combi boilers need an extra energy-saving measure too, such as a smart thermostat with automation and optimisation, weather compensation or load compensation.

If you’re planning a new boiler soon, it’s worth doing both at once.

Questions people ask

Will a smart thermostat work with my boiler?

Most modern boilers work with a smart thermostat, but some features depend on the boiler. We’ll check before you buy or before we fit one.

How long does it take to fit new controls?

Swapping a thermostat or programmer is often done in a short visit. Fitting TRVs on every radiator or adding zones takes longer, as the system may need draining.

What affects the cost?

The controls you choose, how many radiators need new valves, whether new wiring is needed and how easy it is to reach the boiler and pipework. We agree the price with you before any work starts.

“Simone came out to sort my oven. She was extremely friendly, reliable and made me at ease that she was confident on what she was doing. She also explained the issue so I could understand. She was very reasonable in her pricing. I will be using her again when needed. Great job.”
Rebecca H.
“Simone came and serviced my boiler a couple of months ago and she was just fab, from letting me know that morning that she was on her way over, to saying at the end what she had done (and keeping it really simple and high level!). I wouldn't hesitate in recommending her to anyone for any plumbing and heating jobs.”
Katie P.
“Communication was excellent. Very knowledgeable, extremely thorough, will definitely use again. I would highly recommend. Thanks Simone”
Sue M.

Why customers choose us for their heating controls.

We turn up on time

You'll get a message on the morning, and another if we're running late.

We answer questions

We tell you what's wrong and what we're doing, in words that make sense.

We do things right

Careful work, neat pipework, and your home left as tidy as we found it.

We price fairly

You'll know the price before any work starts.

We're fully qualified

Gas Safe registered (No. 676264) for gas and LPG, so your boiler and appliances are fitted and checked to the rules.

We're local & reputable

Based in Skipton and working across the Dales, Craven and East Lancashire, with 5-star reviews from customers near you.

We're Gas Safe Registered

Gas Safe No: 676264
Gas Safe Register

Take control of your heating.

Tell us about your heating and what you’d like it to do, then pick a day that suits you. We’ll get in touch to confirm a time.

“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
Richard T.
Book a visit