New and re-routed pipework by SW Plumbing & Heating

New water pipes, moved pipes and replacement runs for homes across Skipton, the Yorkshire Dales, Craven and East Lancashire, fitted neatly and explained in plain English.

Pipework near you

Most of the plumbing in your home is hidden under floors and behind walls, so it’s easy to forget about until something needs to change. We fit new pipework and re-route existing pipes for homes across Skipton, the Yorkshire Dales, Craven and East Lancashire.

That might be a new feed for a washing machine, moving pipes out of the way of a new kitchen, or replacing an old run that keeps leaking. Whatever the job, we’ll talk it through with you, agree the price before we start and leave the pipework neat, clipped and easy to get at in future.

When you might need new or re-routed pipework

People usually call us about pipework for one of these reasons:

  • You’re fitting a new kitchen or bathroom and the pipes are in the wrong place
  • You want a new supply for a washing machine, dishwasher, fridge, utility sink or outside tap
  • You’re moving a radiator, boiler or cylinder and the pipes need to follow
  • Pipes are boxed in awkwardly or run across a wall where you’d rather they didn’t
  • An old run keeps leaking, weeping at joints or has been patched too many times
  • Your house still has lead or old galvanised steel pipes
  • You’re building an extension and need water taking to the new space

Old lead and steel pipes

Many older stone houses in the Dales were built before copper and plastic pipe were common. If your home was built before about 1970, there’s a chance some of the supply pipe is lead. Lead pipe is usually dull grey, soft, and shows a shiny silver colour if you gently scratch it. It often has rounded, swollen joints rather than neat fittings.

Lead can dissolve into drinking water, and water companies and the Drinking Water Inspectorate advise replacing it. The pipe inside your boundary is normally your responsibility, and the pipe in the street belongs to the water company. Yorkshire Water and United Utilities both have information on lead pipe replacement, and it’s worth asking them whether they’ll replace their section at the same time as you replace yours.

Old galvanised steel pipe can rust from the inside, which narrows the bore and can cause low pressure, discoloured water and leaks. Replacing it with copper or modern plastic pipe usually sorts all three.

Copper or plastic?

We use both, and we’ll suggest whichever suits the job best.

Copper

Copper is rigid, long lasting and looks tidy where pipes are on show, such as around a boiler or along a skirting board. It’s joined with soldered or compression fittings.

Plastic

Plastic push-fit pipe is flexible, so it can be threaded under floors and through joists with less lifting of floorboards. It’s quieter and less prone to freezing damage. It shouldn’t be used right next to a boiler, where the first section of pipe usually needs to be copper.

Often the best answer is a mix: copper where you can see it, plastic where you can’t.

Doing it to the regulations

All plumbing in your home has to meet the Water Supply (Water Fittings) Regulations 1999. They exist to stop water being wasted, misused or contaminated. In practice this means using approved materials and fittings, protecting pipes from frost, and preventing dirty water from flowing back into the drinking supply.

Some work has to be notified to your water company before it starts, such as laying a new underground pipe outside the house, or installing certain types of equipment. We’ll tell you if your job falls into that group. Where pipes run through joists, there are limits on where and how deep the notches and holes can be, so the floor isn’t weakened.

Pipes in cold spaces like lofts, garages and under suspended floors should be insulated, and hot water pipes are insulated to save heat as well.

Things you can check first

Before any pipework job, and in case of a leak, it helps to know where your stopcock is. It’s the valve that shuts off the water to the whole house.

  • Look under the kitchen sink first, where it’s most often found
  • In older homes it may be in a cellar, under the stairs, in a utility room or under a floorboard near the front door
  • Turn it clockwise to close it. If it’s stiff, don’t force it with a tool, as old valves can snap
  • There’s usually a second valve outside, under a small cover near your boundary. This one is for the water company

If a pipe starts leaking, turn off the stopcock, open the cold taps to drain the pipes, and switch off electrics near the water if it’s safe to do so.

What happens on the visit

We’ll start by looking at where the water needs to go and the best route to get it there. We’ll explain the options, such as surface clipped pipe or pipe hidden under floors, and agree the price with you before any work starts.

We’ll turn the water off, fit the new pipework, then turn the water back on and check every joint for leaks. Many small jobs are done in one visit. If we need to order parts or the job is bigger, we’ll book a time to come back. We protect floors while we work and tidy up before we leave.

Questions people ask

How much will it cost?

It depends on the length of the run, how easy it is to reach, whether floorboards need lifting, and the materials used. We’ll give you a price before we start, so there are no surprises.

How long does it take?

Adding a single supply or moving a short section is often done within a day. Replacing pipework through a whole house takes longer, and we’ll give you an idea when we’ve seen it.

Will I be without water?

Only while we’re connecting the new pipes. We’ll tell you before we turn it off and keep the time as short as we can.

“Excellent work done by Simone. She is very careful in her work and everything is done to a high standard.”
Netta H.
“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
Richard T.
“Communication was excellent. Very knowledgeable, extremely thorough, will definitely use again. I would highly recommend. Thanks Simone”
Sue M.

Why customers choose us for their pipework.

We turn up on time

You'll get a message on the morning, and another if we're running late.

We answer questions

We tell you what's wrong and what we're doing, in words that make sense.

We do things right

Careful work, neat pipework, and your home left as tidy as we found it.

We price fairly

You'll know the price before any work starts.

We're fully qualified

Gas Safe registered (No. 676264) for gas and LPG, so your boiler and appliances are fitted and checked to the rules.

We're local & reputable

Based in Skipton and working across the Dales, Craven and East Lancashire, with 5-star reviews from customers near you.

We're Gas Safe Registered

Gas Safe No: 676264
Gas Safe Register

Get your pipework sorted.

Tell us what you’d like moving, adding or replacing and pick a day that suits you. We’ll get in touch to confirm a time.

“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
Richard T.
Book a visit