Radiator and valve repairs and fitting by SW Plumbing & Heating
Radiator repairs, new radiators and valve replacements across Skipton, the Yorkshire Dales, Craven and East Lancashire, with the price agreed before we start.

Radiator and valve work near you
Radiators do most of the work of heating your home, so when one stays cold, leaks or won’t turn down, you notice it quickly. We repair, replace and fit radiators and valves for homes across Skipton, the Yorkshire Dales, Craven and East Lancashire.
That includes swapping a tired radiator for a new one, moving a radiator to a better spot, fitting thermostatic radiator valves (TRVs), and fixing leaks from valves and joints. We’ll explain what we find in plain English and agree the price with you before any work starts.
Signs a radiator or valve needs attention
- A radiator that’s cold at the top but warm at the bottom
- A radiator that’s cold at the bottom or in the middle
- One radiator, or one end of the house, that never warms up
- Drips, damp patches or green or white crust around a valve or joint
- A TRV that won’t turn, or a radiator that stays hot whatever the setting
- Rust spots or pinholes on the radiator itself
- Gurgling or ticking noises from the radiators
Common radiator problems
Air in the radiator
If a radiator is cold at the top, air has usually collected inside. Bleeding it lets the air out. If you have to bleed the same radiator often, something is letting air into the system and it’s worth having it looked at.
Sludge build-up
Over the years, rust and debris collect as black sludge in the bottom of radiators. It stops water flowing and leaves cold patches low down. Sometimes a radiator can be flushed out. Badly affected systems may need a full system clean, and a magnetic filter helps keep it from coming back.
Stuck TRV pin
Thermostatic valves have a small pin under the head that can stick, often after a summer with the heating off. The radiator then stays cold, or stays hot. A stuck pin can sometimes be freed, but older valves are often better replaced.
Leaking valves and joints
Leaks often start at the valve gland (where the spindle comes out) or at the fitting that joins the valve to the radiator. Small leaks can damage floors and ceilings over time, so it’s best to get them sorted early.
An unbalanced system
If radiators near the boiler get hot and those further away stay lukewarm, the system may need balancing. This means setting the lockshield valves so hot water reaches every radiator evenly.
Things you can check yourself
- Make sure the TRV is turned up and the heating is on and calling for heat
- Bleed a radiator that’s cold at the top, with the heating off and the radiator cool, using a radiator key and a cloth to catch drips
- After bleeding, check the pressure gauge on a sealed system. If it has dropped below about 1 bar, your boiler manual will show how to top it up
- Gently turn a stiff TRV head through its full range a few times
If water keeps leaking from a valve or joint, put a bowl or towel under it and book a visit. Please don’t try to undo radiator fittings on a system that’s full of water.
New radiators and valves
A new radiator can make a real difference in a cold room, or simply look better in a room you’ve redecorated. We can fit like-for-like replacements, larger or more efficient radiators, column and designer styles, and heated towel rails.
Getting the size right matters. A radiator that’s too small for the room won’t keep it warm. We’ll look at the room and talk through the options with you before you buy.
Fitting TRVs lets you set each room to the temperature you want and can help cut wasted heat. If your radiators still have old manual valves, swapping them for TRVs is often a simple job to add on when we’re already working on the system.
What happens on the visit
We’ll ask what you’ve noticed, check the radiators and the system pressure, and find out what’s causing the problem. Once we know, we’ll explain it and agree the price before we start.
Many jobs can be done on the first visit. If we need a particular radiator or valve, we’ll order it and book a time to come back. Changing a radiator usually means draining some or all of the system, so we’ll protect your floors, refill and bleed everything afterwards, check for leaks and leave the heating working.
Questions people ask
How long does it take to change a radiator?
A like-for-like swap is often done within a few hours. Moving a radiator, changing its size or replacing several at once takes longer, because the pipework may need altering and the system has to be drained and refilled.
What affects the cost?
The main things are the number of radiators or valves, whether the pipework needs changing, the type of radiator you choose, and whether the system needs draining or cleaning. We’ll agree the price with you before any work starts.
Should I have my whole system cleaned?
Not always. If several radiators are cold at the bottom, or the water is black when you bleed them, a clean is often worthwhile. We’ll tell you honestly if we think it’s needed.
“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
“Communication was excellent. Very knowledgeable, extremely thorough, will definitely use again. I would highly recommend. Thanks Simone”
“Excellent work done by Simone. She is very careful in her work and everything is done to a high standard.”
Why customers choose us for their radiators and valves.
We turn up on time
You'll get a message on the morning, and another if we're running late.
We answer questions
We tell you what's wrong and what we're doing, in words that make sense.
We do things right
Careful work, neat pipework, and your home left as tidy as we found it.
We price fairly
You'll know the price before any work starts.
We're fully qualified
Gas Safe registered (No. 676264) for gas and LPG, so your boiler and appliances are fitted and checked to the rules.
We're local & reputable
Based in Skipton and working across the Dales, Craven and East Lancashire, with 5-star reviews from customers near you.
We're Gas Safe Registered
Gas Safe No: 676264
Get every room warm again.
Tell us which radiators are giving you trouble and pick a day that suits you. We’ll get in touch to confirm a time.
“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
We're Gas Safe registered: No: 676264




