Oil boiler servicing and repairs by SW Plumbing & Heating

Oil boiler servicing and repairs for homes off the gas network across Skipton, the Yorkshire Dales, Craven and East Lancashire.

Oil boilers near you

Many homes in the Dales and the villages around Skipton aren’t on the mains gas network, so they rely on an oil boiler and a tank outside. We service and repair oil boilers across Skipton, the Yorkshire Dales, Craven and East Lancashire.

We’ll explain what we find in plain English and agree the price before any work starts.

Why oil boilers need a yearly service

Oil burns less cleanly than gas, so soot and carbon build up inside the boiler over the year. That build-up makes the boiler less efficient, uses more oil and can lead to breakdowns. OFTEC, the body that sets standards for oil heating, recommends having an oil boiler serviced every year.

A yearly service is also usually needed to keep the manufacturer’s warranty valid, and it’s a good chance to check the tank and oil supply before winter.

What an oil boiler service includes

  • Cleaning the heat exchanger and combustion chamber
  • Replacing the burner nozzle and checking the electrodes
  • Checking or changing the oil filter
  • Checking the oil pump pressure and the burner settings
  • Testing the flue gases to make sure the boiler burns cleanly and safely
  • Checking the flue, seals and controls
  • A look at the oil supply pipe, the fire valve and the tank

Afterwards we’ll tell you how the boiler is running and mention anything that may need attention.

Signs your oil boiler needs a repair

  • No heating or hot water, or the boiler keeps locking out
  • The reset button lights up and the boiler won’t stay running after one reset
  • A strong smell of oil or fumes inside the house
  • Black smoke or soot from the flue outside
  • Loud banging or rumbling when the burner lights
  • Oil leaking from the boiler, the supply pipe or the tank

Common oil boiler faults

Running out of oil

It sounds obvious, but an empty or nearly empty tank is one of the most common reasons an oil boiler stops. Running very low can also draw sludge from the bottom of the tank into the filter and burner, which can need cleaning even after the oil is delivered.

Blocked filter or nozzle

Water and sludge in the tank can block the filter or nozzle, starving the burner of oil. The boiler then struggles to light or keeps locking out.

Ignition and photocell faults

The electrodes light the oil and a photocell checks the flame is there. If either is dirty or faulty, the boiler won’t light or shuts down soon after starting.

Waxed oil in cold weather

In very cold spells, kerosene can thicken in exposed pipes and filters. This is more likely where the supply pipe runs a long way outside.

Things you can check first

  • Check there’s oil in the tank using the gauge or sight tube
  • Check the boiler has power and the thermostat and timer are calling for heat
  • Press the reset button once, as your manual describes. If it locks out again, leave it and book a repair

Pressing the reset button over and over can flood the combustion chamber with oil, which can be dangerous when the burner next lights. Please don’t take the boiler casing off.

Your oil tank

The tank is part of the system too. Look at it every so often for cracks, bulges, rust, leaks or a damaged base, and keep plants and stored items away from it. If you see oil on the ground, or a sudden drop in the level, contact your oil supplier and insurer straight away, because spills can pollute the ground and water. You can also call the Environment Agency incident line on 0800 80 70 60.

If your tank is getting old or damaged, we’ll let you know what we see during a service so you can decide what to do.

Questions people ask

When is the best time for a service?

Late summer or early autumn is ideal, so the boiler is ready before you rely on it through the winter.

Should I have a carbon monoxide alarm?

Yes. Oil boilers can produce carbon monoxide if they aren’t burning properly. Fit an alarm marked to EN 50291 in the room with the boiler.

What affects the cost of a repair?

Mainly what has failed and whether a part is needed. Many faults can be fixed on the first visit. If a part has to be ordered, we’ll agree the price with you and book a time to come back.

“Simone came and serviced my boiler a couple of months ago and she was just fab, from letting me know that morning that she was on her way over, to saying at the end what she had done (and keeping it really simple and high level!). I wouldn't hesitate in recommending her to anyone for any plumbing and heating jobs.”
Katie P.
“Simone did a great job repairing our boiler. Punctual and polite, very knowledgeable. Highly recommend”
John G.
“Communication was excellent. Very knowledgeable, extremely thorough, will definitely use again. I would highly recommend. Thanks Simone”
Sue M.

Why customers choose us for their oil boiler.

We turn up on time

You'll get a message on the morning, and another if we're running late.

We answer questions

We tell you what's wrong and what we're doing, in words that make sense.

We do things right

Careful work, neat pipework, and your home left as tidy as we found it.

We price fairly

You'll know the price before any work starts.

We're fully qualified

Gas Safe registered (No. 676264) for gas and LPG, so your boiler and appliances are fitted and checked to the rules.

We're local & reputable

Based in Skipton and working across the Dales, Craven and East Lancashire, with 5-star reviews from customers near you.

We're Gas Safe Registered

Gas Safe No: 676264
Gas Safe Register

Keep your oil heating running.

Tell us what your oil boiler is doing, or when it was last serviced, and pick a day that suits you. We’ll get in touch to confirm a time.

“Highly recommended - Simone quickly solved the leaks we had and all at a reasonable price. Happy customer will use again!”
Richard T.
Book a visit